Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

CNC Lathe - Inclined Bed Type Tongtai HS-22 mit Stangenlader 1200 (opt.)

Request about this Machine
Basis for negotiation
Holland


  • Reference number Reference number 1124-29999
    Manufacture Year Manufacture Year 2020
    Operation Hours Operation Hours not applicable
  • Vendor

    GK Werkzeugmaschinen GmbH
    Lindenstraáe 21
    64584 Biebesheim
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Lathes
  • Type of Machine

    CNC-lathes (2-axes)
  • Manufacturer

    Tongtai
  • Description

    turning diameter:220 mm
    turning length:200 mm
    control:Fanuc 0i-TF Manual Guide
    bar material dia.:26 mm
    spindle speeds:6000 1/min.
    spindle drive:7,5/11 kW
    rapid speed:20 m/min
    travel -x axis:155 mm
    travel - z:200 mm
    CNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD
    turret:12 (hydr.) fach
    hydraulic unit:mit Lufkühlung
    hollow chuck:hydraulisch, 150 mm
    tool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan
    bar loader:optional
    Tool setter:manuel
    soft jaw:1 Satz
    BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm)

    Contains:

    1.Control system Fanuc 0i-TD (8.4"COLOR LCD)
    2.Spindle motor 7.5/11KW Fanuc â8/8000i
    3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm)
    4.X/Z-Axis stroke 155/220 mm
    5.X/Z Axis rapid traverse 20/20 m/min
    6.Hyd.hollow chuck 6" x 3 jaws
    7.Hydraulic turret system 12 stations
    8.Hyd. Unit for chuck with air cooler
    9.Without tailstock
    10.Standard splash guard
    11.Electrical cabinet with heat exchanger
    12.Coolant unit
    13.Transformer
    14.Chip conveyor with trolley (chain type)
    15.Machine color TongTai grey/blue
    16.Fanuc warranty

    Standard accessories:

    1.O.D. tool holder x 2 pcs
    2.O.D. tool gasket x 6 pcs
    3.I.D. tool holder x 4 pcs
    4.ID tool holder dia 32mm x 4 pcs
    5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32)
    6.Drilling sleeve x 3 pcs (MT#1,2,3)
    7.Soft Jaws x 1 set

    Options:

    1.CE Mark
    2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws
    3.Tool presetter (by manual)
    4.Add soft jaws x 5 sets for 8"chuck
    5.Hard jaws x 1 set (for 8"chuck use)
    6. Dynamic graphic display function
  • State

    Used

Send request

More products from GK Werkzeugmaschinen GmbH

Load