Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
MEP SHARK 282 SXI - Evo
Request about this Machine
Asking price
- Reference number 1108-66326Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Sawing, Filing and Cutting-off MachinesType of Machine
Band Sawing Machines (Horizontal)Manufacturer
MEPTechnical data
- cutting diameter
- 250 mm
- capacity 90 degrees: flat
- 280 x 220 mm
- capacity 90 degrees: square
- 220 x 220 mm
- vice
- 285 mm
- turning speed range:
- 36/72 m/min
- dimensions of saw-band
- 2950x27x0,9 mm
- total power requirement
- 1,5 / 1,8 kW
- weight of the machine ca.
- 485 kg
- dimensions of the machine ca.
- 1700 x 1000 x 1800 mm
Description
Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO
with semi-automatic-dynamic, manual function, has a MEP-28 control
for miter cuts from 45° right to 60° left.
Semi-automatic function:
At the start of the cycle: - Vice closes and motor starts
Saw head lowers for the cut Motor switches off Saw head rises
Vise opens.
Semi-automatic dynamic system (manual lowering of the saw band bow up to
to the desired position and cycle start via the manual button.)
Some features:
New centralized control console on an articulated arm to allow the operator
can be easily switched from any working position.
Low voltage control panel:
Polyester membrane keyboard with thermoformed highlighted
Push buttons and actuation control signal.
Display to show:
* Diagnostics (messages in the user language)
* Alarms (description of alarm causes)
* State of inputs and outputs
* Counting cuts
* Time taken for the cut made
* Current consumption of the saw blade motor
* Saw blade tension
* Blade speed
* Numerical display of head position.
Switch handle IP55 of manual 24V cycle.
Complete program of all special cutting cycles.
Identification of other possible special cutting cycles for special ones
Applications
New, latest generation hydraulic control unit, extremely powerful
and with low energy consumption.
Large work surface with turntable on roller bearings, measuring 265 mm
preloaded thrust bearing, mounted.
Double belt speed (36/72 m/min.) with control
Intended to accommodate an electronic inverter for the
Continuous regulation of the belt speed from 20 to 90 m/min.
Stroke of the saw bow can be programmed directly from the control panel
Adaptation to the cutting material.
Clamping device can be moved laterally to the left and right
Quick release vice.
Manually operated strap tension control with display on the screen
electronic converter.
Base frame with pull-out coolant tray.
Electric coolant pump for cooling and lubricating the saw band.
Preparation for installing the minimum blade lubrication kit
(Optional), in addition to the conventional standard lubrication
Emulsion oil.
Chip clearing brush.
The machine is intended for pallet truck transport.
Length stop for cuts of the same length
Material support arm with roller for attaching the loading platform
Bimetal saw band for solid and profile material.
Tools and instructions for use in the respective user language.
This ad was created with MODUL MWS - the software solution of LogoTech.State
Used